5-Port 2.5G Desktop Switch with 4-Port PoE++ 1

5-Port 2.5G Desktop Switch with 4-Port PoE++ 2

5-Port 2.5G Desktop Switch with 4-Port PoE++ 3

5-Port 2.5G Desktop Switch with 4-Port PoE++ 4

TL-SG105PP-M2

New

5-Port 2.5G Desktop Switch with 4-Port PoE++

5× 10 Mbps/100 Mbps/1 Gbps/2.5 Gbps RJ45 ports
With four PoE++ ports, transfers data and power on one single cable
Works with IEEE 802.3af/at/bt type3 compliant PDs
802.1p/DSCP QoS enable smooth latency-sensitive traffic
Supports PoE Power up to 60 W for each PoE++ port
Supports PoE Power up to 123 W for all PoE ports^*
PoE Auto Recovery guarantees stable operation of PoE devices by automatically rebooting the dropped or unresponsive PD devices
Plug and Play, no configuration and installation required

Learn more about TP-Link PoE technology >

Five
2.5G Ports
123W PoE
Budget*
PoE Auto
Recovery
Plug
and Play

Multicast
Optimization
QoS for Traffic
Prioritization
Silent
Operation
Durable Metal
Casing

2.5G Super-Fast Speeds without Changing Cables

This switch delivers 2.5 times faster network performance than traditional Gigabit switches. It works with CAT5e, CAT6, CAT6a and above cables without upgrading your cabling.

2.5 Gbps 2.5× Faster
1 Gbps

CAT5e Cable
CAT6 Cable
CAT6a Cable

Unlock the Peak Performance of Devices with Multi-Gigabit PoE++ Ports

Featuring 5× 2.5 Gbps PoE++ ports, the switch supports a total PoE power budget of 123 W* with 60 W max per PoE++ port and is capable of future network expansion and deployment.

IP
Camera
IP
Phone
2.5G
WiFi6 AP
2.5G Gaming
Computer
2.5G
NAS/Server
4k
Video

System Self-Healing with PoE Auto Recovery^△

Recovery mode helps automatically detect and reboot PD devices, such as cameras and APs, when they fall offline or go unresponsive—all without needing manual monitoring and restarts.

Plug and Play

1. Connect to Power
2. Connect the Devices

IP Phone

IP Camera

Access Point

Internet

Router
3. Enjoy

HARDWARE FEATURES
Interface	• 5× 10 Mbps/100 Mbps/1 Gbps/2.5 Gbps RJ45 ports • AUTO Negotiation • AUTO MDI/MDIX
Network Media	• 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) • EIA/TIA-568 100Ω STP (maximum 100m) • 100BASE-TX: UTP category 5, 5e cable (maximum 100m) • EIA/TIA-568 100Ω STP (maximum 100m) • 1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum 100m) • EIA/TIA-568 100Ω STP (maximum 100m)
Fan Quantity	Fanless
External Power Supply	External Power Adapter (Output: 53.5 VDC / 2.43 A)
Packet Forwarding Rate	18.6 Mpps
PoE Ports (RJ45)	• Standard: 802.3 af/at/bt type3 compliant • PoE++ Ports: Ports 1–4 • Power Supply: 123 W
Mac Address Table	4K
Switching Capacity	25 Gbps
Dimensions ( W x D x H )	8.2×4.9×1.0 in (209×126×26 mm)
Max Power Consumption	• 7.57 W (220/50 Hz. no PD connected) • 143.37 W (220/50 Hz. with 123 W PD connected)
Max Heat Dissipation	• 25.81BTU/h (220 V/50 Hz with no PD connected) • 488.89 BTU/h (220 V/50 Hz with 123W PD connected)

SOFTWARE FEATURES
Advanced Features	• Compatible With IEEE 802.3af/at/bt type3 Compliant PDs • Mac Address Auto-Learning And Auto-Aging • IEEE 802.3x Flow Control • 802.1p/DSCP QoS • IGMP Snooping • PoE Auto Recovery (Ports 1-4)
Transfer Method	Store-And-Forward

OTHERS
Certification	FCC, CE, RoHS
Package Contents	• TL-SG105PP-M2 • Power Adapter • Installation Guide • Rubber Feet
Environment	• Operating Temperature: 0–40 ℃ (32–104 ℉); • Storage Temperature: -40–70 ℃ (-40–158 ℉) • Operating Humidity: 10–90% RH non-condensing • Storage Humidity: 5–90% RH non-condensing

For additional version information, please go to the support page.

^*PoE budget calculations are based on laboratory testing. Actual PoE power budget is not guaranteed and will vary as a result of client limitations and environmental factors.

△Numbers after different modes represent the effective ports for that mode.

TL-SG105PP-M2

5-Port 2.5G Desktop Switch with 4-Port PoE++