Accessories TL-FC111PB-20

10/100Mbps WDM Media Converter with 1-Port PoE 1

10/100Mbps WDM Media Converter with 1-Port PoE 2

10/100Mbps WDM Media Converter with 1-Port PoE 3

10/100Mbps WDM Media Converter with 1-Port PoE 4

10/100Mbps WDM Media Converter with 1-Port PoE 5

10/100Mbps WDM Media Converter with 1-Port PoE 6

10/100Mbps WDM Media Converter with 1-Port PoE 7

10/100Mbps WDM Media Converter with 1-Port PoE 8

TL-FC111PB-20

Новинка

10/100Mbps WDM Media Converter with 1-Port PoE

Converts the data between fiber (optical signal) and copper (electric signal).
Extends fiber distance up to 20 km.
The 802.3af PoE output makes remote camera deployment easier and more convenient.
WDM (Wave Division Multiplexing) technology enables to transmit and receive data over one single fiber strand instead of two.
Wide operating temperature (0–50 ℃) with reliability.
Auto-negotiation of Half-Duplex/Full-Duplex transfer mode.

Описание

What This Product Does

TL-FC111PB-20 is a 10/100 Mbps media converter with 802.3af PoE output, providing 1× 10/100 Mbps PoE RJ45 port and 1× 100 Mbps SC fiber port, which can convert between electrical and optical signals. With up to 20 km fiber transmission distance and 802.3af PoE output, the media converter is designed to address the needs of flexible long-range surveillance deployment with optical fibers. It provides an economical path towards extending the distance of an existing network.

How This Product Works

TL-FC111PB-20 adopts WDM (wavelength division multiplexing) technology, helping send and receive data at a distance of up to 20 km with only a single mode fiber, which saves half of the cable deployment cost for customers. TL-FC111PB-20 transmits data at 1310 nm wavelength and receives data at 1550 nm wavelength on optical fiber. Therefore, the terminal device used in conjunction with the TL-FC111PB-20 should send data at a wavelength of 1550 nm and receive data at a wavelength of 1310 nm. TP-Link another media converter TL-FC111A-20 is one of the products that can cooperate with TL-FC111PB-20.

Other Features

Besides, this media converter can be used as a standalone device (no rack required) or used with TP-Link's TL-FC1420 rack for auto MDI/MDI-X in TX port in which duplex mode is automatically negotiated.

Характеристики

Сеть
Стандарты и протоколы	IEEE802.3, IEEE802.3i, IEEE802.3u

Параметры окружающей среды
Рабочая температура	0...+50 °C
Температура хранения	–40...+70 °C
Влажность воздуха при эксплуатации	10–90% без образования конденсата
Влажность воздуха при хранении	5–90% без образования конденсата

Аппаратные характеристики
Интерфейсы	• 1 PoE-порт RJ45 10/100 Мбит/с (авто-MDI/MDIX) • 1 оптический порт SC/UPC 100 Мбит/с
Среда передачи данных	100BASE-Tx: (не)экранированная витая пара категории 5 или выше (≤100 м)
Источник питания	48 В / 0,5 А
Светодиодные индикаторы	• PWR (питание) • Link/Act • PoE
Размеры (Ш × Д × В)	94,5 × 73 × 27 мм
Длина волны	• TX: 1310 нм • RX: 1550 нм

Медиа-конвертеры и модули
Тип волокна	Одномодовый оптоволоконный кабель 9/125 мкм (≤20 км)

Прочее
Комплект поставки	• Медиаконвертер TL-FC111PB-20 • Адаптер питания • Руководство по установке

Для дополнительной информации о версии перейдите в раздел поддержки устройства.