Omada 10/100Mbps Multi-Mode Media Converter

  • Complies with 802.3u 10/100Base-TX, 100Base-FX standards
  • Auto-negotiation of Half-Duplex / Full-Duplex transfer mode
  • Extends fiber distance up to 2km

What This Product Does

The MC100CM is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC100CM is designed for use with multi-mode fiber cable utilizing the SC-Type connector. The MC100CM supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data.

Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK´s MC1400 chassis, Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode. The MC100CM will transmit at extended fiber optic distances utilizing multi-mode fiber up to 2 kilometers.

MÓDULO Y CONVERTIDOR DE MEDIOS
Estándares y protocolos IEEE 802.3, IEEE 802.3u, IEEE 802.3x
Función básica Half/Full-Duplex transfer mode for FX port
Full Duplex Flow Control (IEEE 802.3x)
Half Duplex Flow Control (Backpressure)
Extends fiber distance up to 2km
Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely
Puertos 1 100M SC/UPC port
1 100M RJ45 port (Auto MDI/MDIX)
Longitud de onda 1310nm
Medios de red 10BASE-T UTP category 3, 4, 5 cable (maximum 100m)
EIA/TIA-568 100Ω STP (maximum 100m)
Medios de red 100BASE-T UTP category 5, 5e cable (maximum 100m)
EIA/TIA-568 100Ω STP (maximum 100m)
Medios de red 100BASE-FX Multi-mode Fiber
Indicadores LED PWR, FDX/Col, Link/Act, SPD
Dimensiones (Al x An x Pr) 3.7*2.9*1.1 in. (94.5*73.0*27.0 mm)
Fuente de alimentación External power supply
Consumo máximo de energía 2.5W
Seguridad y emisión FCC, CE, RoHS
Package Contents • Media Converter MC100CM
• Power Adapter
• Installation Guide
Ambiente Operating Temperature: 0℃~40℃ (32℉~104℉)
Storage Temperature: -40℃~70℃ (-40℉~158℉)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing