TL-WA901ND

450Mbps Wireless N Access Point

  • 450Mbps wireless transmission rate, brings smooth wireless N experience
  • Supports multiple operating modes: Access Point, Client, Universal/ WDS Repeater, Wireless Bridge
  • Easily setup a WPA-PSK/WPA2-PSK encrypted secure connection at a push of the WPS button
  • Up to 30 meters (100 feet) of flexible deployment with included Power over Ethernet Injector

What This Product Does

The TP-LINK Wireless N Access Point TL-WA901ND is designed to establish or expand a scalable high-speed wireless N network or to connect an Ethernet enabled device such as a game console, digital media adapter, printer, or network attached storage device to a wireless network. The AP supports a host of different functions that makes your wireless networking experience more flexible than ever before. Now, you can enjoy a better Internet experience when downloading, gaming, video streaming or with any other application that you may wish to use.

Wireless N Speed & Range

Adopting IEEE 802.11n advanced MIMO (Multi Input Multi Output) technology, it simultaneously works through three antennas with smart antenna technology to Tx and Rx to overcome the interference and signal degradation when traveling long distances or through physical barriers in a small office or a large apartment, resulting in an incredible improvement in the wireless performance, even in a steel-and-concrete building. Above all, you could easily pick up the wireless network during long-distance connection where legacy 11g products may not!

Multiple Operating Modes
- Easy to Build WLAN

Supports AP Client, Bridge, Repeater and AP operation modes to enable various wireless applications to give users a more dynamic and comprehensive experience when using your AP. Multiple operating mode also helps you easily build wireless network for hard-to-wire locations or eliminating wireless dead zone.

Passive PoE Supported
-More Flexible Deployment

The TL-WA901ND is able to be powered using an Ethernet cable to simultaneously send data and electricity to wherever your AP may be located even up to 100 feet away. This feature multiplies your options allowing you to place the AP in a position that is most convenient to get the best signal possible, such as on the wall or on the ceiling of your office.

CARACTERÍSTICAS DE HARDWARE
Interface Un Puerto RJ45 Ethernet 10/100M
Soporta PoE Pasivo
Botón WPS/Reset, Encendido/Apagado
Consumo de Poder 5.8W
Fuente de alimentación externa 12VDC/1A
Estándares inalámbricos IEEE 802.11n, IEEE 802.11g, IEEE 802.11b
Dimensiones (An x Pr x Al) 7.67*5.12*1.43 pulg.( 194.82*129.93*36.2mm)
Tipo de Antena 3 Antenas Desmontables Omnidireccionales de 5dBi (RP-SMA)
CARACTERÍSTICAS INALÁMBRICAS
Frecuencia 2.4-2.4835GHz
Tasa de señal 11n: Hasta 450Mbps(dinámica)
11g: Hasta 54Mbps (dinámica)
11b: Hasta 11Mbps (dinámica)
Sensibilidad de recepción 270M: -68dBm@10% PER
130M: -68dBm@10% PER
108M: -68dBm@10% PER
54M: -68dBm@10% PER
11M: -85dBm@8% PER
6M: -88dBm@10% PER
1M: -90dBm@8% PER
Transmit Power <20dBm(EIRP)
Modos inalámbricos Punto de Acceso/Repetidor (Extensor de Rango)/ Puente con AP/Cliente/Multi-SSID
Funciones inalámbricas Habilitar/Deshabilitar Radio Inalámbrico;
WMM (Wi-Fi Multimedia)
Filtrado Inalámbrico de Direcciones MAC
Estadísticas Inalámbricas
Función de Dominio de Inicio de Sesión
Seguridad inalámbrica 64/128/152-bit WEP / WPA / WPA2,WPA-PSK / WPA2-PSK
DHCP Servidor DHCP
Calidad de servicio WMM
Gestión SNMP
Funciones avanzadas Soporta hasta 30 metros PoE
OTROS
Certificación CE, FCC, RoHS
contenidos del paquete Punto de Acceso Inalámbrico TL-WA901ND
3 Antenas Desmontables Omnidireccionales
Inyector de Alimentación PoE
CD de Instalación
Guía de Instalación Rápida
Cable Ethernet RJ-45
Requisitos del sistema Microsoft Windows XP, Vista, Windows 7, Windows 8,Windows 10
Ambiente Temperatura de Funcionamiento: 0℃~40℃ (32℉~104℉)
Temperatura de Almacenamiento: -40℃~70℃ (-40℉~158℉)
Humedad de Funcionamiento: 10%~90% sin condensación
Humedad de Almacenamiento: 5%~90% sin condensación

*Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. Actual wireless data throughput and wireless coverage are not guaranteed and will vary as a result of 1) environmental factors, including building materials, physical objects, and obstacles, 2) network conditions, including local interference, volume and density of traffic, product location, network complexity, and network overhead, and 3) client limitations, including rated performance, location, connection, quality, and client condition.    

Actual network speed may be limited by the rate of the product's Ethernet WAN or LAN port, the rate supported by the network cable, Internet service provider factors and other environmental conditions.